F . A . Q . - frequently asked question
Frequently asked questions
MicroFin® is one of the worlds most advanced, new concept developed by Dynatron Corporation, and permits the production of copper heat sinks with a precise and super fine detail previously considered impossible.
As the Intel and AMD processors expanded faster, the thermal solution of cooling devices fair behind CPU. For cutting edge technology, Dynatron Corporation invested and developed the MicroFin® Technology to fill the current market needs to build a better device for the AMD: K7 (SocketA) Intel:FC-PGA(Socket 370) thermal solutions.
Why do the
MicroFin® Technology Coolers better than other coolers?
The traditional methods to make the heat
sinks are Extrusion, Forging, and Die- Casting, and the maximum fins can be
manufactured with a density approximately 20 to 40 fins their thickness or
diameter. The material must mix with other metal to form heat sink with the
thick and low-density fins that can’t meet the thermal solution for the CPU.
Some other method mix copper with other material to form the outer frame and
brazed or weld the fins into the heat sink, which created the interface layer
about 2 to 3 degree of the heat increase between the bottom heat sink and the
fins, and also its very difficult to control the quality of the mass production
heat sinks because some poor contract or disassociate of brazed or weld fins
which is not a reliable products.
Nevertheless, Dynatron’s MicroFin® Technology coolers can eliminate all the
weakness problems.
MicroFin® advantage points are:
Fin Cross Section – the cross sectional shape of the fin is skives with thin
slice with 0.35 mm and 1.0mm pitch in the 60 x 60 heat sink that is better heat
dissipation.
Fin Density – high density up to 60 fins for AMD K7 and Intel FC-PGA CPUs.
Fin Distribution – formed ideal distribution, the fins arrayed uniformly on the
base without the interfaces, which decrease at lease 2 to 3 degree of heat
source.-applied the high quality of aluminum, and the copper to build the heat
sinks for Cooler series.
Unique High Quality – cut though the whole pieces of aluminum or copper evenly
to form up to 60 high thin fins, and all heat sinks are unique high quality in
our production line. In conclusion, taking performance factor into account,
Dynatron’s CPU coolers had high-density fins 2 to 3 times than other coolers,
and reliability quality products, we highly recommend high density fins of heat
sink with high pressure drop cooling fan for your GHz CPU.The model, DC1206BM-O
and DC1206BM-L in our product list, are example of a new MicroFin CPU cooler,
and it’s one of the fineness in the world for the thermal management products.
The high quality of DC1206BM-O and DC1206BM-L is the best CPU coolers to insure
and protect your computer’s CPU.The process starts with a single piece of
material, typically made of either copper or aluminum. A cutting tool contacts
one surface of material and under controlled motion raises a fin, which is form
with controlled thickness, height, and center to center spacing. Fins are
uniform, consistent, and accurately spaced next one.
For Copper material:
Fin height can be 70 mm and up depends on the pitch and thickness
Fin pitch can be as small as 1 mmFor
Aluminum material:
Fin height can ba also 70 mm and up depends on the pitch and thickness
Fin pitch can be as small as 1.3 mm
How would I place an order?
There are several ways you can place an
order. You can send email to sales@dynatron-corp.com, or contact us by phone at
(510) 498-8888. You can also direct your request thru fax at (510) 498-8488.
Is it secure
to place an order online?
Currently we don’t support online order. It is NOT SAFE to send any of your credit card information through our web site.
Do you accept individual user order?
Yes. You as our customer, we provide
quality service for your satisfaction.
What are the available methods of payment?
We are currently accepting VISA & MasterCard credit cards for now. To make payment by phone, please have your credit card information ready. Our sales representatives will assist you to complete your transaction. We also accept cash payment if you wish to come directly at our sales offices.
How would I know the prices of your product?
Please send us your inquiry by email, phone or fax, and indicate what products you are interested to know. Our sales staff will respond on your request.
What is your
RMA policy?
Please download the RMA request form and refer to our RMA policy for return procedure.
Please fax the RMA request form to (510)498-8488 and obtain a RMA number.
